Ever considering that I came to Shanghai Shibang Machinery Co., Ltd., my understanding from the Raymond Mill grow with every single passing day, on a daily basis to learn loads of issues, didn't know that this equipment is how the supplies are ground into fine powder solution, just after learning to know by way of the air. Raymond mill grinding procedure: soon after winnowing fan wind blowing, blowing a powder, by way of analysis, machine is arranged above the grinding chamber for separation, fine through thick materials and fall into the grinding chamber of regrinding fineness, the specifications with the flow into the cyclone collector, collected by the powder outlet, i.e. the completed solution. The return air pipe on the upper finish of the large cyclone collector back in to the fan, the wind road cycle, and also the flow within the state of negative stress, circulating the air amount increased by exhaust pipe exhaust fan plus the host, in to the compact cyclone collector, purification Adjust the air volume Raymond mill, is situated inside the fan inlet pipe around the air volume manage valve, typically to the maximum position, according to the production needs fineness, appropriate adjustments. Located in the blower outlet dust discharge valve around the tube, to feed at the dust free of charge spray, air volume little, higher fineness. It should be noted, volume is too little, the host is easy to precipitate in air material, should really be adjusted. This device increases the air separator, ball mill is used more than after, is usually completed, and is actually a very mature gear, has the benefits of little occupied location, the operation is easy, the range is 80 -425 mesh fine powder processing gear used.